44
3
Basic Operations
3
Turn the zoom ring to
determine the size of the
subject.
Determine the size of the subject.
1Using the Zoom Lens (p.48)
4
Position the subject inside the
autofocus frame and press the
shutter release button halfway.
The autofocus system operates. The
focus indicator ] appears in the
viewfinder when the subject is in focus.
The flash pops up automatically when
necessary. (Manually lift the flash
when Flash mode is not set to [Auto].)
1OPERATING THE SHUTTER
RELEASE BUTTON (p.45)
1Hard-to-Autofocus Subjects (p.46)
1Using the Built-in Flash (p.49)
5
Press the shutter release
button fully.
The picture is taken.
Focus indicator
To Next Page
Loading...
Need help?
General
