97
4
Menu Reference
Select a menu item and set
Procedure to set the Quality Level on the [A Rec. Mode] menu is
explained as an example.
3
Use the four-way controller
(23) to choose an item.
4
Press the four-way controller
(5).
Available Quality Level options
appear.
Press the four-way controller (5) to
move to the pop-up menu if there is
one.
5
Use the four-way controller (23) to select a setting.
6
Press the 4 button.
The camera returns to the menu screen. Next, set other items.
Press the 3 button to return to Capture or Playback mode.
Even after you press the 3 button and close the menu screen, your
settings will not be saved if the camera is turned off improperly (such as by
removing the batteries while the camera is on).
• You can use the e-dial to switch among the [A Rec. Mode] menu, the [Q
Playback] menu, [H Set-up] menu, and [A Custom] menu when no pop-up
menu is displayed.
• If the 3 button is pressed in Capture mode, the [A Rec. Mode] menu
appears. If the 3 button is pressed in Playback mode, the [Q
Playback] menu appears.
Exit
Image Tone
Rec. Mode
Recorded Pixels
Quality Level
Saturation
Sharpness
Contrast
OK
OK
Image Tone
Rec. Mode
Recorded Pixels
Quality Level
Saturation
Sharpness
Contrast
Cancel
To Next Page
Loading...
Need help?
General
