12
1 Loading the batteries
Open the battery cover and load
two CR2 Lithium batteries.
See page 19.
2 Set the date and time
You can skip this step if you do
not imprint the data at this time,
but the date and time should be
adjusted after loading the
batteries. See page 24.
3 Attaching the lens
Align the red dots on the camera
and lens mounts. Turn the lens to
clockwise until it clicks in place.
See page 28.
4 Set the lens aperture ring to
position
This camera does not work other
than position. See page 34.
5 Turn the power switch ON.
Depress the main switch button.
See page 23.
QUICK AND EASY SHOOTING
To Next Page
Loading...
