43
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
1 Set the main switch to the
ON position, Depressing the
Drive mode button for over
2seconds, Film status
information will
appear on the LCD.
2 Holding the drive mode
button and depress the
shutter release button to
start rewinding.When the
film is fully rewound,
blinks on the LCD panel.
• The film will be rewound, Film
status information on the LCD
panel blinks and counts the
frame numbers in reverse.
• Before opening the back cover,
check that is blinking.
REWINDING A FILM IN MID-ROLL
If you wish to unload the film before exposing all the frames, use
this function.
Step 9
To Next Page
Loading...
