32
OPERATING THE SHUTTER
RELEASE BUTTON
The shutter release button has two positions. Depressing it down
halfway (first position) turns on the exposure meter and
autofocus system.
Depressing it fully (second position) releases the shutter. When
taking a picture, depress the shutter release button gently to
prevent camera shake.
✍
MEMO
• To prevent camera shake, depress the shutter release button gently.
• Before loading a roll of film, slowly depress the shutter release button
to learn where the first position is.
• The LCD indication stays on for about 10 seconds after the button is
released from the halfway position. Depressing the shutter release
button halfway down keeps the LCD indicator on.
Not
pressed
Pressed halfway
down
(first position)
Step 8
Pressed fully
down
(
second position
)
To Next Page
Loading...
Need help?
General
