77
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
Selecting the various built-in flash modes
✍
MEMO
• The auto-popup flash mode can only be set when one of 6 picture
modes is selected.
• The built-in flash pops up automatically when is displayed on the
LCD panel. However, it discharges only when required. (Automatic flash
function)
• or can only be set when one of 6 picture modes is selected.
• The auto-popup function of the built-in flash does not work when the
AE lock function is in use.
• The automatic flash function can also be used with the external flash.
• Even if is displayed on the LCD panel, the built-in flash does not
pop up automatically when the external flash has been mounted either
with the power off or the external flash is not yet fully charged.
• If the red-eye reduction is used while the AF360 FGZ, etc. is set as a
slave unit, the pre-flash will trigger the slave unit to discharge. Do not
use red-eye reduction with slave unit.
At each depress of the flash
mode button, the flash mode
on the LCD panel changes as
shown in the chart.
To Next Page
Loading...
Need help?
General
