50
Auto Bracket Exposure Mode
When you depressed shutter release button, three consecutive
frames will be taken at the different exposure times. The first
frame is exposed with no compensation. The second frame is
under exposed and the third frame is over exposed.
The bracketing amount can be set to ±1/2 EV or ±1 EV.
1 Depress the drive mode
button until or
appears on the LCD panel.
Exposure with no
compensation
Under exposure Over exposure
✍
MEMO
• If the exposure compensation amount is small, the effect will not be
noticeable with print film.
SELECTING A DRIVE MODE
To Next Page
Loading...
Need help?
General
