34
For quick and easy shooting, set your camera for Standard
program mode, autofocus, auto flash and single frame drive mode.
This standard program mode allows you to take pictures by simply
depressing the shutter release button. The camera selects the best
combination of aperture and shutter speed setting.
SET THE STANDARD PROGRAM MODE
1 Set the lens aperture ring to
the position.
To set the lens aperture ring to
the position, turn the
aperture ring while holding down
the aperture-A lock button on the
lens.
2 Set the pointer mark to
by moving the select
dial while depressing the
exposure mode button.
When the shutter release button
is depressed halfway down, the
shutter speed (TV) and aperture
value (AV) are displayed on the
LCD panel.
✍
MEMO
• The shutter cannot be released when an F or FA lens is attached with
the aperture ring set to other than position.
Step 1
To Next Page
Loading...
Need help?
General
