25
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
The digits increase by one each time the select dial
is moved to right and the digits decreased by it’s
moved to left.
Holding the select dial for about one second will
change the digits rapidly.
5 After the data has been changed, depress the
[DATE] button each time until blinking stops.
6 Depress the [DATE] button to select your date
mode that you wish to imprint on your pictures.
✍
MEMO
Depress the [DATE] button in synchronize with a time signal to set the
second to zero while ( : ) is blinking.
Operational precautions
• The working temperature for data printing is -10°C – 50°C (14°F –
122°F).
• Use DX-coded films with ISO rating from 25 – 5000.
• If high-speed film with an ISO rating of1000 or faster is used, the
imprinted characters may blur.
• If film with ISO rating of 50 or slower is used, the printed characters
may be dark or dim.
• If you release the shutter while the blinking data is being corrected, the
data cannot be imprinted.
To Next Page
Loading...
Need help?
General
