29
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
✍
MEMO
• The body mount cap is designed to protect the camera against
scratches and dust at the factory. For storage, the optional accessory
"Body Mount Cap K" is available.
• After mounting the lens, try to turn the lens counterclockwise to make
sure it is locked in place.
• The camera body and lens mount incorporate lens information contacts
and an AF coupler. Dirt, dust, or corrosion may cause damage to the
electrical system. Clean the contacts with a soft, dry cloth.
• We assume no responsibility nor liability for damages resulting from the
use of lenses made by other manufacturers.
• To protect the lens information contacts and AF coupler of the lens
against damage after removal, be sure to place the lens down with the
mount side upward.
To Next Page
Loading...
Need help?
General
