63
BASIC OPERATION
(PREPARATION)
BASIC OPERATION
(SHOOTING)
ADVANCED OPERATIONS
OTHERS
• When the power is on, the shutter speed and aperture value
will be displayed on the LCD panel.
Exposure Warning
If the subject is too bright or
too dark, the plus or
minus indicator in the
viewfinder and the selected
shutter speed on the LCD
panel would blink slowly as a
warning as shown. When the
subject is too bright, choose a smaller aperture, if available;
when it is too dark, choose a larger aperture, if available. When
the shutter speed indication stops blinking, you can take the
picture. If both shutter speed and aperture blink rapidly, it means
that the exposure is out of metering range, unable to obtain a
correct exposure even if the aperture is adjusted. Select a darker
subject if it is too bright, or use a flash if it is too dark.
4 Confirm the shutter speed
and aperture value on the
LCD panel.
To Next Page
Loading...
