110
3
Taking Pictures
6
Press the 3 button twice.
The camera returns to capture status.
The D-Range Setting icon appears on the
display.
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
P
When [Highlight Correction] is set to O
Q
When [Shadow Correction] is set to O
O
When [Highlight Correction] and
[Shadow Correction] are both set to O
• When [Highlight Correction] is set to O, the minimum sensitivity is ISO
160.
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button
(p.121).
Adjusting the White Balance
F
Auto The camera adjusts the white balance automatically.
G
Daylight Use this mode when taking pictures outside in sunlight.
l
Shade Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
J
Fluores. Light Use this mode when taking pictures under fluorescent light.
K
Manual Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color
balance of pictures taken with the [White Balance] set to F.
• Depending on the selected shooting mode, the white balance setting
may not be selected. Refer to “Functions Available for Each Shooting
Mode” (p.224) for details.
14:25
14:25
38
38
09/09/2010
09/09/2010
To Next Page
Loading...
Need help?
General
