197
7
Settings
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Folder
Name].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [PENTX] or
[Date].
5
Press the 4 button.
The setting is saved.
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Video Out].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a video output format.
Choose the video output format to match
the input format of the AV equipment.
Changing the Video Output Format
S e ttin g
2/3
MENU
C ancel
C ancel
OK
OK
O K
NTS C
PAL
Video Out
Eye-Fi
Power Saving
Auto Power Off
Reset
5
sec.
Brightness Level
3
min.
To Next Page
Loading...
Need help?
General
