Pentax Optio RZ10 - Setting the Date and Time

47
1
Getting Started
Set the current date and time and the display style.
1 Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2 Use the four-way controller (23)
to choose the date format.
Choose from [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
3 Press the four-way controller (5).
The frame moves to [24h].
4 Use the four-way controller (23)
to select [24h] (24-hour display) or
[12h] (12-hour display).
5 Press the four-way controller (5).
The frame returns to [Date Format].
6 Press the four-way controller (3).
The frame moves to [Date].
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities”
(p.235) for the video output format of each city that will be set at the time of initial
setting, and “Changing the Video Output Format” (p.197) for changing the video
output format.
Setting the Date and Time
MENU
Date Adjust m en t
Cancel
Date Format
Da
te
Tim e
S ettings complete
mm dd yy
01/01/2010
00:00
// 24h
MENUMENU
Date Adjust m en t
Cancel
Date Format
D
a te
Tim e
S ettings complete
01/01/2010
00:00
mm dd yy//
24h