118
3
Taking Pictures
3
Use the four-way controller (45)
to select O or P.
O Instant Review is displayed.
P Instant Review is not displayed.
4
Press the 3 button.
The camera returns to capture status.
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sharpness].
3
Use the four-way controller (45)
to change the sharpness level.
F Soft
G Normal
H Sharp
4
Press the 3 button.
The camera returns to capture status.
Instant Review 1p.69
If the Blink Detection function worked when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during Instant
Review.
Setting the Image Sharpness (Sharpness)
If you change the [Sharpness] setting frequently, you can save time by
assigning it to the Green button (p.121).
Rec. Mode
Instant Review
MENU
Exit
2/3
Blink Detection
Digital Zoom
Movie
D-Range Setting
Shake Reduction
CCD-Shift
Rec. Mode
Saturation
MENU
Exit
3/3
Sharpness
Contrast
Green Button
Memory
Date Imprint Off
To Next Page
Loading...
Need help?
General
