92
3
Taking Pictures
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
using the self-timer.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select g and press
the four-way controller (3).
Optional Frames
The optional frames are stored in the built-in memory in the Optio RZ10. These
optional frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW111) supplied with
the camera (p.170).
Adding a Frame to a captured image 1p.167
Using the Self-timer
g
Self-timer
Use this mode when you want to be included in a group
picture. The picture is taken approximately ten seconds
after the shutter release button is pressed.
Z
2 sec. Self-timer
Use this mode to avoid camera shake. The picture is taken
approximately two seconds after the shutter release button
is pressed.
Shutter release
button
Four-way controller
4 button
To Next Page
Loading...
Need help?
General
