Pentax Optio RZ10 - Setting the Auto Power off Function

201
7
Settings
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2 Use the four-way controller (23) to select [Auto Power
Off].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select the time until the camera
turns off automatically.
Choose from [5min.], [3min.] or [Off].
5 Press the 4 button.
The setting is saved.
Setting the Auto Power Off Function
Auto Power Off does not function in the following situations:
- While recording sound in the Voice Recording mode
- While taking pictures in j (Continuous Shooting) mode
- While recording a movie
- During a slideshow or movie/sound playback
- While the camera is connected to a computer
- While transferring images using an Eye-Fi card
S e ttin g
O ff
3 m in .
5mi n .
2/3
MENU
C ancel
C a nc e l
C ancel
OK
OK
OK
O K
Video Out
Eye-Fi
NTSC
Power Saving
Auto Power Off
Reset
Brightness Level