Pentax Optio RZ10 - Taking Still Pictures; Taking Pictures

66
3
Taking Pictures
Taking Still Pictures
The Optio RZ10 features a wide range of shooting modes and functions
to suit almost any subject or scene. This chapter describes how to take
pictures with the most commonly used standard settings (the factory
default settings).
1 Press the power switch.
The camera turns on and is ready to take still pictures. In this manual,
this is called “still picture capture mode”.
2 Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.72).
When the camera detects the pet’s full face,
the shutter is automatically released.
Taking Pictures
Shutter release
button
Power switch
Zoom lever
14:25
1 4 :2 5
14:25
38
3 8
38
09/09/2010
0 9 /0 9 / 2 01 0
09/09/2010
Focus frame
14:25
1 4 :2 5
38
3 8
09/09/2010
0 9 /0 9 / 2 01 0
09/09/2010
38
14:25
Face detection frame