Pentax Optio RZ10 User Manual

202
7
Settings
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
- The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
- One of the 3 pre-installed images
- One of your own images (compatible images only)
1 In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2 Use the four-way controller
(2345) to select ^ (Start-up
Screen).
3 Press the 4 button.
The image selection screen appears.
4 Use the four-way controller (45)
to choose the image for the start-
up screen.
Only images available for the start-up
screen are displayed. You can also choose
one of the 3 pre-installed images or the
Guide Display Start-up screen already
stored in the camera.
5 Press the 4 button.
The start-up screen is set.
Changing the Start-up Screen
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card is formatted.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when the camera starts up in the
playback mode.
2 / 2
2/2
Start-up Screen
Start-up Screen
Start-up Screen
For setting a captured
image as the Start-up
Screen
OK
OK
OK
MENU
Cancel
Cancel
OK
Cancel
1 00
1 0 0
-
0017
0 0 17
1 00
-
0017
MENU
C ancel
C a nc e l
O K
O K
C ancel
OK
O K

Pentax Optio RZ10 Specifications

General

Brand	Pentax
Model	Optio RZ10
Category	Digital Camera
Language	English