Pentax Optio RZ10 User Manual

112
3
Taking Pictures
Have a blank sheet of white paper or similar material ready.
1 In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2 Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3 Press the shutter release button fully.
The white balance is automatically adjusted.
4 Press the 4 button.
The setting is saved and the [ A Rec. Mode] menu reappears.
5 Press the 3 button.
The camera returns to capture status.
You can set the area of the screen where the brightness is metered to
determine the exposure.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
To Set the White Balance Manually
Setting the AE Metering
L
Multi-segment
metering
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
M
Center-weighted
metering
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
N
Spot AE metering
The camera determines the exposure by metering the
brightness only at the center of the image.
MENU
Adjust
SHUTTER
White Balance
Cancel
C a nc e l
OK
O K
OKCancel
OK

Pentax Optio RZ10 Specifications

General

Brand	Pentax
Model	Optio RZ10
Category	Digital Camera
Language	English