91
3
Taking Pictures
4
Use the four-way controller
(2345) to choose the frame you
want to use.
5
Turn the zoom lever to the right
(y).
The selected frame appears in single-image
display.
You can choose another frame using either
of the following operations.
6
Press the 4 button.
The framed image appears on the display.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.72).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
Four-way controller (45) Press to choose a different frame.
Zoom lever to the left (f) Returns to the 9-frame display of the frame
selection screen, and then lets you choose a
different frame in the same way as Step 4.
• The number of recorded pixels is fixed at h (2048×1536).
• The factory default settings, the camera includes 3 default frames and
87 optional frames built-in. (The CD-ROM supplied with the camera
contains a total of 90 frames, including the default frames.)
y
OK
OK
OK
38
38
09/09/2010
09/09/2010
14:25
14:25
To Next Page
Loading...
Need help?
General
