Pentax Optio S12 User Manual

114
Taking Pictures
4
You can press the shutter release button all the way down (single step)
without pressing the button halfway to shorten the shutter delay. Set the
“One push PF” in the [A Rec.Mode] menu to on to use the One push PF
function.
The One push PF function allows you to release the shutter at the right
moment. The pictures are taken as deep-focus (pan focus) shots.
1 Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23)
to select [One push PF].
3 Use the four-way controller (45)
to select [O (On)/P (Off)].
The camera is ready for taking pictures.
Setting the One push PF function to On
The One push PF function works only when Focus Mode is
Standard (Autofocus) and One push PF in the [A Rec.Mode] menu
is set to On.
Rec.Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
12M
AUTO 800
MENU
Shutter release
button
MENU button
Four-way
controller
Rec.Mode
MENU
Exit
EV Compensation
Movie
±0.0
Digital Zoom
Instant Review 0.5sec0.5sec
D-Range Comp.
One push PF
Off

Pentax Optio S12 Specifications

General

Brand	Pentax
Model	Optio S12
Category	Digital Camera
Language	English