EasyManua.ls Logo

Pentax Optio S12 - Using the Self-Timer

Pentax Optio S12
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
Taking Pictures
4
In self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
1 Press the four-way controller (2) in Capture mode.
2 Press the four-way controller
(45) to select g (Self-timer) or
(2 sec. Self-timer).
3 Press the OK button.
The camera is ready for taking pictures using
the Self-timer.
4 Press the shutter release button halfway.
The focus frame on the display will light green when the camera is in
focus.
5 Press the shutter release button fully.
The self-timer starts running.
g (Self-timer) : The picture is taken after the self-timer lamp
lights for about seven seconds, then blinks for
about three seconds.
(2 sec. Self-timer): The picture is taken after the self-timer lamp
blinks for about two seconds.
Using the Self-timer
Focusing may be compromised if you move the camera while the
self-timer is running.
The countdown appears on the display when you press the shutter
release button.
If you press the shutter release button halfway during a countdown,
the countdown stops. Press the shutter release button fully to restart
the countdown.
Troubleshooting “Subject is not in focus” 1p.202
Shutter release button
Four-way controller
OK button
OK
OK
OK
OK
Drive Mode
Drive Mode
Self-timer
Self-timer
Drive Mode
Self-timer
MENU
Cancel
Cancel

Table of Contents

Related product manuals