146
6
Playback/Deleting/Editing
Viewing Images on AV Equipment
By using the AV cable, you can capture, play back and dub images
on a TV or other equipment with a video IN jack. Make sure that both
the AV equipment and the camera are turned off before connecting
the cable.
1 Open the terminal cover and connect the AV cable
supplied with the PC/AV terminal.
2
Connect the other end of the AV cable to the AV equipment.
Yellow (video) video input terminal
White (audio) sound input terminal
When using stereo sound equipment, insert the sound jack into the L
(white) terminal.
3 Turn the AV equipment on.
When the AV equipment connected to the camera and the AV equipment
used to view images are separate, turn both pieces of equipment on.
To view images on a TV with several video inputs, switch the video inputs to
the one connected to the camera, referring to the operating manual for the TV.
4 Turn the camera on.
Changing the Video Output Format 1p.187
VIDEO
AUDIO
(L) (R)
1
2
To Next Page
Loading...
Need help?
General
