Pentax Optio S12 - Default Settings

193
8
Appendix
Default Settings
The table below lists the factory default settings.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
∗ : The setting depends on the Memory setting (1p.122).
Reset Setting
Yes : The setting returns to the default setting with the Reset function
(1p.191).
No : The setting is saved even after reset.
[A Rec.Mode] Menu Items
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Recorded Pixels 12M Yes Yes p.96
Quality Level D (Better) Yes Yes p.98
White Balance
F
(Auto) ∗ Yes p.100
AF Setting
Focusing Area
J
(Multiple) Yes Yes p.102
Focus Limiter On Yes Yes p.103
Aux.AF Light On Yes Yes p.104
AE Metering
L
(Multi-segment) ∗ Yes p.105
Sensitivity AUTO 800 ∗ Yes p.106
EV Compensation
±0.0
∗ Yes p.108
Movie
Recorded Pixels 640 (640×480) Yes Yes p.109
Quality Level C(Best) Yes Yes p.110
Movie SR
On
Yes Yes p.111
Digital Zoom On Yes Yes p.90
Instant Review 0.5sec Yes Yes p.112
D-Range Comp. Off Yes Yes p.113
One push PF On Yes Yes p.114