35
Quick Start
2
By default, the image is displayed on the display for 0.5 seconds right
after shooting (Instant Review). You can change the display time for the
Instant Review. (1p.112)
If you set it longer, you can delete the image while it is displayed on the
display.
1 Press the Green/i button while the image is displayed.
The screen for deleting the image appears.
2 Press the four-way controller (2) to select [Delete] and
press the OK button.
The displayed image is deleted.
You can temporarily brighten the display to improve viewing. (LCD Bright
Mode)
It is useful when you view the display outdoors or in brighter places.
1 In Capture mode, press and hold the OK/Display button
for more than 1 second.
The display turns brighter for a certain amount of time.
Instant Review
Brightening the Display
You can cancel the function by doing either of the followings.
- Switch the display mode to LCD Backlight Off. (
1 p.56)
- Turn off the camera.
To Next Page
Loading...
Need help?
General
