USER MANUAL
Peplink Balance Series
http://www.peplink.com - 102 - Copyright © 2010 Peplink
Admin Settings
Router Name
This field allows you to define a name for this Peplink Balance unit.
By default, Router Name is set as Balance_XXXX, where XXXX refers to the last 4 digits
of the serial number of that balance unit.
Admin User Name
It is set as admin by default and is not customizable.
Admin Password
This field allows you to specify a new administrator password.
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User
Name
It is set as user by default and is not customizable.
User Password
This field allows you to specify a new user password. Once the user password is set, the
feature of read-only user will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can remain idle
before the balance terminates its access to Web Admin Interface.
By default, it is set as 4 hours.
Security
This opt
ion is for specifying the protocol(s) through which the Web Admin Interface can be
accessible:
• HTTP
• HTTPS
• HTTP/HTTPS
To Next Page
Loading...
Need help?
General
