peplink 210 User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 8 - Copyright © 2010 Peplink
3.1.6 Outbound Policy
 Link load distribution per TCP/UDP service
 Persistent routing for specified source and/or destination IP addresses per TCP/UDP service
3.1.7 QoS
 Quality of Service for different applications and custom protocols
 User Group classification for different service levels (available only with Peplink Balance 380,
390, 580, 710 and 1350)
 Bandwidth usage control and monitoring on group- and user- level (available only with Peplink
Balance 380, 390, 580, 710 and 1350)
 Application Prioritization for custom protocols and DSL optimization
3.2 Other Supported Features
 Easy-to-use web-based administration interface
 HTTP and HTTPS support for Web Administration Interface
 Configurable web administration port and administrator password
 Firmware upgrades, configuration backups, Ping, and Traceroute via Web Administration
Interface
 Remote web based configuration (via WAN and LAN interfaces)
 Remote reporting to Peplink Balance reporting server
 Hardware High Availability via VRRP, with automatic configuration synchronization
 Hardware backup via LAN bypass (available only with hardware revision 2 of Balance 390,
Balance 580 and 1350)
 Read-only user for Web Admin
 Built-in WINS server
 USB based mobile modem support (available only with Peplink Balance 380, 390, 580, 710 and
1350)
 Time server synchronization
 SNMP
 Email notification
 Syslog
 SIP passthrough
 PPTP packet passthrough
 Event Log
 Active Sessions
 Client List
 UPnP / NAT-PMP

peplink 210 Specifications

General

Brand	peplink
Model	210
Category	Wireless Router
Language	English