Name: peplink 210
Brand: peplink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

USER MANUAL

Peplink Balance Series

C.3 Bypassing the Firewall to Access Hosts on LAN

C.3.1 Scenario

There are times when remote access to computers on the LAN is desirable; for example, when hosting

web sites, online businesses and FTP download and upload areas, etc.

In such cases, it may be appropriate to create an inbound NAT mapping for the network to allow some

hosts on the LAN to be accessible from outside of the firewall.

C.3.2 Solution

Web Admin Interface can be used for adding an inbound NAT mapping to a host and to bind the host to

the WAN connections, via Network > NAT Mappings > Add NAT Rule

For example, the following settings add the host, with IP address 192.168.1.102, to an Inbound Mapping

and bind the host to the default IP and 211.123.123.100 of WAN1:

Questions and Answers:

Need help?

Do you have a question about the peplink 210 and is the answer not in the manual?

peplink 210 Specifications

General