USER MANUAL
Peplink Balance Series
http://www.peplink.com - 101 - Copyright © 2010 Peplink
18 System Settings
18.1 Admin Security
There are two user accounts available for accessing the Web Admin. Usernames are admin and user.
They represent two user levels - admin has full administration access, while user is a read-only account.
The read-only account can only access the device's status information and cannot make any change on
the device.
A web login session will be logged out automatically when it has been idled for a longer time than
the Web Session Timeout. The default timeout is 4 hours 0 minute. Before the session expires, you
may click the Logout button in the Web Admin to exit from the session.
For security reason, after logging in to the Web Admin Interface for the first time, it is recommended to
change the administrator password.
Configuring the administration interface to be accessible only from the LAN can further improve system
security.
Administrative Settings configuration is located at: System > Admin Security
Admin Account UI User Account UI
To Next Page
Loading...
Need help?
General
