USER MANUAL
Peplink Balance Series
http://www.peplink.com - 30 - Copyright © 2010 Peplink
If Drop-in mode is going to be configured, Setup Wizard will move on to Drop-in Settings.
If Mobile Internet Connection is checked, Setup Wizard will move on to Operator settings.
If Custom Mobile Operator Settings is selected, APN parameters are required to be entered. Some
service providers may charge a fee for connecting to a different APN. Please consult the service provider
for the correct settings.
Select the connection type for WAN connection(s) from the following screen:
Depending on the selection of connection type, further configuration may be needed. For example,
PPPoE and Static IP require additional settings for the selected WAN port. Please refer to Section 10,
Configuration of WAN Interface(s), for details on setting up DHCP, Static IP and PPPoE.
To Next Page
Loading...
Need help?
General
