peplink 210

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 74 - Copyright © 2010 Peplink
WAN connection by checking the appropriate boxes and the IP addresses associated with
the WAN connections by highlighting the appropriate items in the list. (Multiple items in the
list can be selected by holding CTRL and clicking on the items.)
Click Save to save the settings when configuration is complete.
Zone Transfer
This setting specifies the IP address(es) of secondary DNS server(s) that are to be allowed
to retrieve zone records from the DNS server of Peplink Balance.
The zone transfer server of Peplink Balance listens on TCP Port 53.
Peplink Balance serves both the clients that are accessing from the specified IP addresses,
and the clients that are accessing from the LAN Interface (of the Peplink Balance unit).
Default
Connection
Priority
Default Connection Priority defines the default priority group of each WAN connection in
resolving A records. It applies to A records which have the Connection Priority set to
Default. Please refer to Section 13.4.5 for the details.
The WAN connection(s) with the highest priority (smallest number) will be chosen. Those
with lower priorities will not be chosen in resolving A records unless the higher priority ones
become unavailable.
To specify the Primary and Backup connections, click the Edit button that corresponds to
Default Connection Priority. The screen should assemble the one below.
Each WAN connection is associated with a priority number. Click Save to save the settings
when configuration is complete.
Domain name
This section shows a list of domain names to be hosted by the Peplink Balance. Each
domain can have its “NS”, “MX” and “TXT” records, and its or its sub-domains’ “A” and
“CNAME” records.
Input the domain name into the blank text field and press to add as a new record.
Click on a domain name to edit. Press to remove a domain name.