Name
This field is for specifying a name to represent this profile.
Enable
When this box is checked, this BGP profile will be enabled.
Otherwise, it will be disabled.
Interface
The interface where BGP neighbor is located
The Autonomous System Number (ASN) of this profile
BGP Neighbor's details
Neighbor's IP address
Autonomous
Neighbor's ASN
Multihop/TTL
Time-to-live (TTL) of BGP packet.
Leave it blank if BGP neighbor is directly connected, otherwise you must specify a
TTL value. Accurately, this option should be used if the configured neighbor IP
address does not match the selected Interface's network subnets. TTL value must be
between 2 to 255.
Optional password for MD5 authentication of BGP sessions.
AS-Path
Prepending:
AS path to be prepended to the routes received from this neighbor.
The value must be a comma separated ASN.
For example "64530,64531" will prepend "64530, 64531" to received routes.
Hold Time
Time in seconds to wait for a keepalive message from the neighbor before
considering the BGP connection is staled.
This value must be either 0 (infinite hold time) or between 3 and 65535 inclusively.
To Next Page
Loading...
