peplink HD2 mini - Bgp

https://www.peplink.com
186
Copyright @ 2021 Pepwave
RIPv2 Settings
Authentication
Choose an authentication method, if one is used, from this drop-
down menu.
Available options are MD5 and Text. Enter the authentication key next to the drop-
down menu.
Interfaces
Determine which interfaces this group will use to listen to and deliver RIPv2 packets.
OSPF & RIPv2 Route Advertisement
PepVPN Route
Isolation
Isolate PepVPN peers from each other. Received PepVPN routes will not be
forwarded to other PepVPN peers to reduce bandwidth consumption..
Network
Advertising
Networks to be advertised over OSPF & RIPv2. If no network is selected, all LAN /
VLAN networks will be advertised by default.
Static Route
Advertising
Enable this option to advertise LAN static routes over OSPF & RIPv2. Static routes
that match the Excluded Networks table will not be advertised.
20.2 BGP
Click the Advanced tab from the top bar, and then click the Routing Protocols>BGP item on
the sidebar to configure BGP.
Click "x" to delete a BGP profile.
Click "Add" to add a new BGP profile.