Safety Information
11
This instrument has passed the following EMC tests:
Emission: EN 50 081-1:92 Immunity: EN 50 082-1:92
Emission of conducted
and radiated noise
EN 55 011:91
EN 60 555-2:87
EN 60 555-3:87
Electromagnetic Compatibility
IEC 801-2:91
IEC 801-3:84
IEC 801-4:88
IEC 801-5:90
United States (FCC)
This instrument is classified as a digital device used exclusively as industrial,
commercial, or medical equipment. It is exempt from the technical standards
specified in Part 15 of the FCC Rules and Regulations, based on Section 15.103[c].
Japan (FCC)
This instrument has been tested and found to comply with the limits of a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense. Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
