Accessory Installation
45
Multi-sippers
WARNING
Electrical hazard
To prevent potential injury to yourself and damage to the instrument,
switch OFF all instruments in the system and disconnect them from the
line power supply before you alter, or make any new, electrical
connections.
Installation Overview
Connector on Spectrometer:
Accessory Port
Installation: See sipper manual
Cables: See sipper manual
Tubes: See sipper manual
Sample Compartment Cover: Unchanged
Figure 9 Multi-sipper, electrical connection
Multi-sipper
Spectrometer
B0167808
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
