Accessory Installation
43
Linear Transporter
WARNING
Electrical hazard
To prevent potential injury to yourself and damage to the instrument,
switch OFF all instruments in the system and disconnect them from the
line power supply before you alter, or make any new, electrical
connections.
Installation Overview
Connector on Spectrometer:
Accessory Port
Installation: See linear transporter handbook
Cables: Lead through bottom of spectrometer housing
Tubes: Lead through the tube ports
Sample Compartment Cover: Unchanged
Alignment: See linear transporter handbook
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
