Lambda 20, Lambda 40 UV/Vis Spectrometers
42
Sample Compartment Cover
Some of the accessories used with the spectrometer require removal of the sample
compartment cover.
1. Do this carefully as follows:
2. Open the cover only about 90 degrees to the sample compartment.
3. Carefully slide the cover straight up off both hinges to remove.
You install the sample compartment cover, or other accessory cover, by
performing this procedure in reverse.
Sample Compartment Front Cover
Some of the accessories used with the spectrometer require removal of the sample
compartment front cover.
Do this carefully as follows:
1. Open the sample compartment cover.
2. Carefully slide the cover straight up off both hinges to remove.
You install the sample compartment cover, or other accessory cover, by
performing this procedure in reverse.
Sample Compartment Window
To remove or install certain accessories, you need to remove the sample
compartment windows.
Each window has a magnetic frame and can be easily removed by hand.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
