PerkinElmer EnVision User Manual

Routine maintenance
61
Pull out the tubes from the silicone connectors.
Lift the tip mount away from the instrument.
Take the new tip mount. Make sure it has the tip configuration you want.
Carefully push each tube from the dispenser into the silicone connectors at
the end of the tubes coming from the tip mount.

PerkinElmer EnVision Specifications

General

Light Source	Xenon flash lamp
Software	EnVision Manager
Read Modes	Absorbance, Fluorescence, Luminescence, Time-Resolved Fluorescence, Fluorescence Polarization
Plate Formats	384-well
Detection Technology	PMT
Temperature Control	Ambient to 45°C