24 . Lambda 365 Users Guide
• Do not attempt to make internal adjustments or replacements except as directed in the
manuals.
• Disconnect the instrument from all voltage sources before opening it for any
adjustment, replacement, maintenance, or repair. If afterwards, the opened instrument
must be operated for further adjustment, maintenance, or repair, this must only be
done by a PerkinElmer Service engineer.
• Whenever it is possible that the instrument is no longer electrically safe for use, make
the instrument inoperative and secure it against any unauthorized or unintentional
operation. The electrical safety of the instrument is likely to be impaired if, for example,
the instrument shows visible damage; has been subjected to prolonged storage under
unfavorable conditions; or has been subjected to severe stress during transportation.
To Next Page
Loading...
