PerkinElmer Lambda 365 User Manual

Accessories . 57
Water Jacketed Single Cell Holder
Use this accessory to control the temperature of a sample in a standard 10 mm rectangular
cuvette. This accessory needs a circulator for control temperature with a separately
purchased circulator. Optional stirring is available with a separately purchased stir controller.
8 Position Multicell Holder / Water Jacketd 8-Position
Multicell Holder
Use this accessory to measure eight samples automatically. Automatic Water Jacketed 8-
Position Multicell Holder accommodates a temperature by circulator. These accessories are
controlled by UV Express software.
Micro Cell Holder
Use this accessory to test micro volume samples.

PerkinElmer Lambda 365 Specifications

General

Wavelength Range	190 - 1100 nm
Power Requirements	100-240 V AC, 50/60 Hz
Wavelength Accuracy	±0.3 nm
Wavelength Repeatability	±0.1 nm
Wavelength Reproducibility	±0.1 nm
Photometric Repeatability	±0.001 Abs
Baseline Flatness	±0.0005 Abs
Baseline Stability	<0.0003 Abs/hour (after warm-up)
Data Interval	0.1 - 5 nm
Light Source	Tungsten halogen lamp and deuterium lamp
Sample Compartment	Standard 10 mm cell holder
Detector	Silicon Photodiode