PerkinElmer Lambda 365 User Manual

Accessories . 59
Variable Angle Transmission Holder
Use for measuring the transmittance of various features of Film, Glass, and Plate, etc
according to the variable angle.
50 mm Transmission / Reflectance Sphere
Used for measuring the reflectance or total transmittance of solid samples such as; metals,
glass, textiles, paper, gems, and powders.
Fixed Angle Reflectance Holder
Use this accessory to test coatings and semi-conductor wafers; especially effective for
measuring specular reflectance.

PerkinElmer Lambda 365 Specifications

General

Wavelength Range	190 - 1100 nm
Power Requirements	100-240 V AC, 50/60 Hz
Wavelength Accuracy	±0.3 nm
Wavelength Repeatability	±0.1 nm
Wavelength Reproducibility	±0.1 nm
Photometric Repeatability	±0.001 Abs
Baseline Flatness	±0.0005 Abs
Baseline Stability	<0.0003 Abs/hour (after warm-up)
Data Interval	0.1 - 5 nm
Light Source	Tungsten halogen lamp and deuterium lamp
Sample Compartment	Standard 10 mm cell holder
Detector	Silicon Photodiode