28 . Lambda 365 Users Guide
Decontamination and Cleaning
Before using any cleaning or decontamination methods except those specified by
PerkinElmer, users should check with PerkinElmer that the proposed method will not damage
the equipment.
Decontamination
Customers wishing to return instrumentation and/or associated materials to PerkinElmer for
repair, maintenance, warranty or trade-in purposes are advised that all returned goods must
be certified as clean and free from contamination.
The customer's responsible body is required to follow the “Equipment Decontamination
Procedure” and complete the “Certificate of Decontamination”. These documents are
available on the PerkinElmer public website:
Procedure:
http://las.perkinelmer.com/Content/technicalinfo/dts_instrumentdeconprocedure.pdf
Certificate form:
http://las.perkinelmer.com/Content/technicalinfo/dts_perkinelmercertificationofdecontaminati
onform.pdf
If you do not have access to the internet and are located in the U.S., call toll free at 1-800-
762-4000 or (+1) 203-925-4602, 8:30 a.m. - 7 p.m. EST and speak to Customer Support.
In Canada, call toll free 800-561-4646 and speak to Customer Support.
If you are located outside of the United States or Canada, please call your local PerkinElmer
sales office for more information.
Cleaning the Instrument
Exterior surfaces may be cleaned with a soft cloth, dampened with a mild detergent and
water solution. Do not use abrasive cleaners or solvents.
To Next Page
Loading...
Need help?
General
