PerkinElmer Lambda Series User Manual

12 . High-Performance Lambda Spectrometers Getting Started Guide
Overview
This chapter describes the general safety practices and precautions that must be observed
when operating your high-performance Lambda spectrometer.
This advice is intended to supplement, not supersede, the normal safety codes in the user's
country. It is also a supplement to the PerkinElmer standard Safety and Health Policy. The
information provided does not cover every safety procedure that should be practiced.
Ultimately, maintenance of a safe laboratory environment is the responsibility of the analyst
and the analyst's organization.
Please consult all manuals and CDs supplied with your high-performance Lambda
spectrometer and accessories before you start working with the instrument. Carefully read
the safety information in this chapter and in the other manuals supplied. When setting up the
instrument or performing analyses or maintenance procedures, strictly follow the instructions
provided.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm