PerkinElmer Lambda Series User Manual

18 . High-Performance Lambda Spectrometers Getting Started Guide
Electrical Safety Issues
To ensure satisfactory and safe operation of the instrument, it is essential that the
green/yellow lead of the line power cord is connected to true electrical earth (ground).
If any part of the instrument is not installed by a PerkinElmer Service Engineer, make sure
that the line power plug is wired correctly:
Terminal Cord Lead Colors
International USA
Live Brown Black
Neutral Blue White
Protective Conductor (earth/ground) Green/Yellow Green
NOTE: The instrument must always be positioned so that it can be easily disconnected from
the power supply.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm