PerkinElmer Lambda Series User Manual

14 . High-Performance Lambda Spectrometers Getting Started Guide
General Operating Conditions
Only use the high-performance Lambda spectrometer indoors and under the following
conditions:
Temperature 15 °C to 35 °C
Relative humidity 80% maximum (non-condensing)
If possible, avoid any adjustment, maintenance or repair of the opened, operating
instrument. If any adjustment, maintenance or repair of the opened instrument is necessary,
this must be done by a skilled person who is aware of the hazard involved.
Whenever it is likely that the high-performance Lambda spectrometer is unsafe, make it
inoperative. The high-performance Lambda spectrometer may be unsafe if it:
• shows visible damage;
• fails to perform the intended measurement;
• has been subjected to prolonged storage in unfavorable conditions;
• has been subjected to severe transport stresses.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm