EasyManuals Logo

PerkinElmer Lambda Series User Manual

PerkinElmer Lambda Series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background image
44 .
High-Performance Lambda Spectrometers Getting Started Guide
Setting up the Instrument in the Software
Before you can use your instrument with the UV WinLab software, you must set up the
instrument in the UV WinLab Explorer.
NOTE: If your instrument has been installed by a PerkinElmer Service Engineer, you should
not need to do this. You will require permission to configure instruments to add a
new instrument.
1. With the instrument switched on, from the Folder List in the Explorer Window select
Instruments.
The Instruments pane is displayed.
2. Double-click Add New Instrument,
.
The New Instrument Wizard starts.
3. Select the High performance UV/Vis/NIR instrument from the Choose the type of
instrument drop-down list.
The Description below the drop-down list details the available instruments for the
selected type.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PerkinElmer Lambda Series and is the answer not in the manual?

PerkinElmer Lambda Series Specifications

General IconGeneral
CategoryUV Vis Spectrophotometer
Spectral Bandwidth0.5, 1, 2, 4 nm
Data Interval1, 2, 5 nm
Slit Width0.5, 1, 2, 4 nm (selectable)
Light SourceDeuterium and Tungsten Halogen lamps
DisplayLCD
InterfaceUSB, RS-232
Power Requirements100 - 240 VAC, 50/60 Hz
Wavelength Range190-1100 nm

Related product manuals