PerkinElmer Lambda Series User Manual

Safety Practices . 23
5. Replace the fuse holder by aligning the lug at the bottom of the fuse holder with the
slot in the socket and then pushing the holder into place.
You can hear a click as each lug snaps into place.
NOTE: If you use the correct fuses but the instrument still does not work correctly, or the
fuses blow repeatedly, contact your PerkinElmer Service Engineer.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm