PerkinElmer Lambda Series User Manual

32 . High-Performance Lambda Spectrometers Getting Started Guide
2. Check that you have the following items:
Part No. Description
L6100126/7 UV WinLab Software Kit (ES/Standard)
L6050009 High-Performance Lambda Spectrometers User Manuals CD
B0505071 2 Single-cell holders
B0142227 Screwdriver 5.5 mm
B0126972 Screwdriver 4.0 mm
L9001764 Long crosshead screwdriver
L9005024 Connecting cable, spectrometer to PC
B0507756 Spare fuse drawer
B0155573 Spare fuses (10 × 3.15 A T)
L6020277 2 × 10% manual attenuators
L6020276 2 × 1% manual attenuators
L6020376 2 × beam block assembly
N/A Country specific power lead
NOTE: The two manual attenuators and the beam block assemblies are supplied only with a
Lambda 650 or Lambda 750 spectrometer.
3. Examine the components for any signs of damage in shipment:
– Check the entire outer cabinet of the spectrometer for damage, and make sure
that the terminals, fuse holders and so on are not damaged.
– Open and close the sample compartment cover, checking that it moves freely,
without binding.
– Make sure that the compartment is free of dust or other foreign matter.
NOTE: In the event of damage or missing parts, file an immediate claim with the authorized
carrier, and inform your PerkinElmer office or representative.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm