Drain
Pressurized System: Hot coolant can cause seri-
ous burns. To open the cooling system filler cap,
stop the engine and wait until the cooling system
components are cool. Loosen the cooling system
pressure cap slowly in order to relieve the
pressure.
1. Stop the engine and allow the engine to cool.
Loosen the cooling system filler cap slowly in order
to relieve any pressure. Remove the cooling
system filler cap.
Illustration 65 g03461657
Illustration 66 g02350785
2. Remove connection hose (1) on the engine. Also
remove the drain plug (2). Open the drain cock or
remove the drain plug on the radiator.
Allow the coolant to drain.
For information regarding the disposal and the
recycling of used coolant, consult your Perkins dealer
or Perkins distributor.
Flush
1. Flush the cooling system with clean water in order
to remove any debris.
98 SEBU8732
Maintenance Recommendations
Coolant (ELC) - Change
To Next Page
Loading...
